:: W&M :: Punjab Weights & Measures

(WMP) Weights & Measures Punjab Accuracy in Weights & Measures (W&M.) of goods & services purchased by the consumer is important for consumer protection.

GOVERNMENT OF THE PUNJAB Labour Department

GOVERNMENT OF THE PUNJAB
LABOUR DEPARTMENT,

Dated Lahore, the 30th march, 1976.

N O T I F I C A T I O N

No, 4-4(lab-II)/75 – In exercise of the powers under sub-section (3) of Section I of Punjab Weights & Measures (International System) Enforcement Act, 1975. The Government of the Punjab is pleased to dize that the Provisions of the Punjab Weights & Measures (International System) Enforcement Act, 1975, shall apply to the under-takings mentioned in the Schedule annexed to this Notification, with immediate effect.

BY ORDER OF THE GOVERNMENT OF PUNJAB

                                                                              H.M. AKRAM
                                                                              SECRETARY TO GOVERNMENT OF THE PUNJAB
                                                                              LABOUR DEPARTMENT

……………….

S C H E D U LE

Directorate of Labour Welfare,
Government of the Punjab.

Endorsement No. CWM/IS/15/76/7094-97 Dated :- 3-5-76

Ten copies are forwarded for information of all Inspecting Staff to the :-

        1.         Zonal Director Labour Welfare, Lahore Region, Lahore.
        2.         Joint Director Labour Welfare, Sargodha Region, Lyallpur.
        3.         Joint Director Labour Welfare, Multan Region, Multan.
        4.         Joint Director Labour Welfare, Rawalpindi Region, Rawalpindi.

                                                                                          Assistant Director (Weights),
                                                                                             For Director Labour Welfare.
                                                                                       Punjab, Lahore.

ANNEXURE ‘B’

S.NO. Organization Actual date of Implementation

1. i) Pakistan International Airlines Corporation 1st July, 1974

ii) Pakistan Council of Scientific and Industrial
Research Laboratories, Lahore. ”

iii) Pakistan Institute of Nuclear Sciences and
Technology, Nilore, Rawalpindi. ”

iv) Nuclear Institute for Agriculture and
Biology, Lyallpur. ”

v) Atomic Energy Mineral Centre, Lahore. ”

vi) Atomic Energy Medical Centre, Lahore. ”

vii) Atomic Energy Medical Centre, Multan. ”

viii) Central Testing Laboratories, Lahore. ”

ix) National Health Laboratories, Islamabad. ”

x) Soil Survey Project of Pakistan, Lahore. ”

xi) Defence Science Organization, Rawalpindi. ”

2.                     Universities, Institutes, Medical Colleges,                      1st October, 1974
                        Laboratories of research centres in ………..
                        Lyallpur, Multan, Lahore, Rawalpindi and
                        ……, relating Husbandry, Forestry and
                        Engineering Research.

3. Pharmaceutical Industry. 1st Nov., 1974

4. i) Pakistan Telegraph & Tele Deptt. 1st Jan., 1975

ii) Pakistan Meteorologist Deptt. ”

iii) Fertilizer Industries. ”

5. Illumination Industry. 1st Feb., 1975

6. Electronic Industry. 1st April, 1975

7. Caustic Soda/Chlorine & Bleaching
Powder Industry. 1st May, 1975

8. i) Rayon (Acetate) Industry. 1st June. 1975

            ii)         Asbestos Cement Sheets & Asbestos
                        Cement Pipes Industry.                                                        ”

9.         i)          Pakistan Post Offices.                                                   1st July, 1975

ii) Pakistan Mint. ”

iii) Insurance Corporation and Insurance
Companies. ”

iv) State Bank of Pakistan & other
Banking Institutions. ”

v) Cement Industry. ”

vi) Soda Ash & Soda Bicarb Industry. ”

10. Sulphuric Acid Industry. 1st August, …..

11. i) Ball and Roller Bearings. 1st August, ……

ii) Electric Meters. ”

iii) Dye-Stuff / Pigments. ”

12. i) Paper (Writing, Printing, Packing
machinicals & News-prints). 1st October, 1975

ii) Paper Board /Straw Board/Special
Board Etc. ”

            iii)         Printing & Publishing.                                               ”

            iv)        Paper Converting & Packing.                                               ”

v) Dry Cell Batteries. ”

            vi)        Accumulator Batteries.                                               ”

            vii)        Perfumes, Cosmetics and other
                        Toilet, preparations.                                                          ”

viii) Sheet and Plate Glass Industry. ”

13. i) Ration Depots. 1st Nov., 1975

ii) Wheat and Flour Mills. ”

iii) Sugar Mills (Packing/begging
section only). ”

iv) Rice Mills. ”

v) Beverage (Alcoholic & Non-Alcoholic
Industry. ”

vi) Miscellaneous Food Preparation
Industry. ”

vii) Cork Manufacturing Industry. ”

viii) Electric Switch Gear Industry. ”

ix) Glass Products Industry. ”

x) Matches Industry. ”

xi) Optical Goods Industry. ”

xii) Safety Razor & Barber’s Equipment
Industry. ”

xiii) Surgical Instruments Industry. ”

xiv) Transformers Industry. ”

xv) Watches, Clocks and Parts Industry. ”

GOVERNMENT OF THE PUNJAB
LABOUR & HUMAN RESOURCE
DEPARTMENT

Dated Lahore the 18-11-05

NOTIFICATION

No ………. In exercise of the powers conferred him under section 30 of the Punjab Weights and Measures (International System) Enforcement Act, 1975 (Pb, Act LII of 1975), the Governor of the Punjab is pleased to direct that in the Punjab Weights and Measures (International System) Enforcement Rules 1976, the following further amendment shall be made with immediate effect:-

1.         In rule 11, after sub-rule (3), the following new sub-rule (3A) shall be added, namely-

            (3A)     Notwithstanding anything to the contrast contained in sub-rule (3), in the case of the CNG in mass and not in any other measuring system and

the occubier/owner shall install and use such units so as to deliver and sell CNG in mass and not in any other measuring system: and
the Inspector shall stamp every such unit with a uniform stamp supplied by the Controller for this purpose indicating the area or the district in which it has been stamped or the Inspector by whom it has been stamped or both.

2. In Schedule IX, in clause 3.19 the full stop at the end shall be substituted by a colon and thereafter, the following proviso shall be added namely-

“Provided that in case of CNG dispensing units, the maximum pressure at the time of delivery or sale shall be maintained 200 bars with permissible error of 10 bars (in excess or deficiency). The maximum permissible error of measuring CNG at the time of verification, re-verification, sale and inspection shall not exceed 2.5% (in excess or deficiency) of the total quantity of Gas delivered or sold at any operation as uniform as practicable.”

SECRETARY
GOVERNMENT OF THE PUNJAB
LABOUR & HUMAN RESOUCE
DEPARTMENT

GOVERNMENT OF THE PUNJAB
LABOUR & HUMAN RESOURCE DEPARTMENT

Dated Lahore the October 01, 2004

N O T I F I C A T I O N

No.SO(DEV-1) 3-36/03. In exercise of the powers conferred upon him under Section 30 of the Punjab Weights & Measures (International System) Enforcement Act, 1975 (LII 1975), the Governor of the Punjab is pleased to direct that in the Punjab Weights & Measures (International System) Rules, 1976, the following further amendments shall be made namely:-

AMENDMENTS
For the existing schedules X & XII the following shall be substituted:-

SCHEDULE-X
(See Rule- 16)

Fees payable for the verification and stamping of commercial weights & measures and weighing instruments and measuring instruments:-

1. Weights

Denomination

Fee per piece
(Rupees)

a) Bullion Weights
20 kg
10 kg
5 kg
2 kg
1 kg

500 g
200 g
100 g
50 g
20 g
10 g
    5 g
    2 g
    1 g

500 mg
200 mg
100 mg
50 mg
20 mg
10 mg
    5 mg
    2 mg
    1 mg

10.00
10.00
10.00
10.00
10.00

10.00
10.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00

5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00

b) Caret Weights

     500 c
     200 c
     100 c
       50 c
       20 c
       10 c
         5 c
         2 c
         1 c
50/100 c
20/100 c
10/100 c
5/100 c
1/100 c
0.5/100 c

5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00

c) Brass Weights (other than Bullion)
    1 kg
500 g
200 g
100 g
50 g
20 g
10 g
    5 g
    2 g
    1 g

10.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00

d) Steel Metal Weight other than Bullion

500 mg
200 mg
100 mg
50 mg
20 mg
10 mg
    5 mg
    2 mg
    1 mg

5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00

e) Iron & Steel Weights

50 kg
20 kg
10 kg
    5 kg
    2 kg
    1 kg

500 g
200 g
100 g

20.00
10.00
10.00
10.00
5.00
5.00

5.00
5.00
5.00

2. LIQUID CAPACITY MEASURES (INCLUDING DISPENSING MEASURES).

Denomination

Fee per piece
(Rupees)

Above 100 Litres

Rs. 50.00 for the first hundred Litres & Rs.50.00 for every additional 100 Litres or part thereof

100 Litre
50 Litre
20 Litre
10 Litre
5 Litre
2 Litre
1 Litre

500 ml
200 ml
100 ml
50 ml
20 ml
10 ml
5 ml
2 ml
1 ml

50.00
15.00
15.00
15.00
10.00
10.00
10.00

5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00
5.00

3. LENGTH MEASURES

Denomination

Fee per piece
(Rupees)

10 Meters & above

Above 1 Metre up to 9 Metre

1 Metre & 0.5 Metre

15.00

10.00

5.00

4. WEIGHING INSTRUMENTS OTHER THAN BEAM SCALES OF CLASSES ‘C’ & ‘D’

Denomination	Fee per piece (Rupees)
Above 50 metric tones	Rs 2.000/- for the first 50 metric tonnes & Rs.500/- for each additional 25 metric tonnes or part thereof
Above 20 metric tones but not exceeding 50 metric tonnes.	2,000.00
Above 10 metric tonnes but not exceeding 20 metric tonnes	1000.00
Above 5 metric tonnes but not exceeding 10 metric tonnes	500.00
Above 1 metric tonne but not exceeding 5 metric tonnes	200.00
Above 250 kg but not exceeding 1 metric tonne	200.00
Above 50 kg but not exceeding 250 kg	50.00
Above 20 kg but not exceeding 50 kg	…..
Above 10 kg but not exceeding 20 kg	30.00
Above 500 gm but not exceeding 10 kg	20.00
Not exceeding 500 gm	10.00

Note:

Where a weighing instrument has two or more sets of graduation (one marked for seers and mounds or for lbs.owts and the other for metric units) the set marked for metric units only shall be verified and fees charged thereof.
Where two weight tables or platforms are connected to one steel-yard or office machines, two separate fees in accordance with the capacity of the respective weight tables or platforms are payable.

5. BEAM SCALE CLASSES ‘C’ & ‘D’.

DENOMINTION	Fee per piece (Rupees)
Above 1 metric tonne	150.00
Above 250 kg but not exceeding 1 metric tonne	50.00
Above 50 kg but not exceeding 250 kg	50.00
Above 20 kg but not exceeding 50 kg	20.00
Above 1 kg but not exceeding 10 kg	20.00
Above 500 gm but not exceeding 10 kg	10.00
Not exceeding 500 gm	5.00

6. MEASURING INSTRUMENTS (PETROL & FUEL PUMPS, FLOW METRES, FILLERS ETC)

Capacity	Fee per instruments (Rupees)
For all types	1000.00 (Per Dispensing Unit)

6-A WEIGHING INSTRUMENT / DISPENCING UNIT OF CNG.

Capacity	Fee per instruments (Rupees)
For all types	2000.00 (Per Dispensing Unit)

SCHEDULE – XII
(See Rule – 24)

Licensing and renewal fees for manufacturers and dealers.

1. Manufacturers.

Category	New Licence Fee (Rupees)	Annual Renewal Fee (Rupees)
A. Manufacturers of weight bridges, scientific/computerized weighing instruments dispensing units of petrol/diesel etc. pumps, Flow meters, & CNG instruments bullion weights and measuring instruments having high precision.	20,000.00	10,000.00
B. Manufacturers of weights of cast iron, brass, steel or any other metal of all series, weighing scales of classes others than given n Category A & C. Platform machines of all capacities.	10,000.00	5,000.00
C. Manufacturers of beam scales of class C & D, counter scales of all capacities, volume measures, capacity measures and linear measures.	8,000.00	5,000.00

2. Dealers.

New License Fee (Rupees)	Annual Renewal Fee (Rupees)
600.00	300.00

Secretary
Labour & Human Resource Department

No. & Date Even

A copy is forwarded for information and necessary action to:-

The Secretary, Government of the Punjab, Finance Department.

The Superintendent, Government Printing Press, Punjab, Lahore. He is requested to supply 50-copies of Notification to this Department.

The Director Labour Welfare, Punjab, Lahore.

The Section officer (Taxation-I) Government of the Punjab, Finance Department.

All District Officers Labour in Punjab.

SECTION OFFICER (DEV-I)